Setting The Smile Detection Feature - Polaroid i1035 User Manual

• Setting the Smile Detection Feature

This feature is based on "Face Tracking". When you use smile capture,
you need to set the face tracking feature on first.
1. Press the
to Still Image mode.
2. Press the
button to enter menu bar.
3. Press the
Detection.
4. Press the
5. Press the
desired setting.
6. Press the
choice.
NOTE:
• There is a 5-second time-out to detect the smiles. If no smile is detected
after 5 seconds, the camera will not take photos. Should this happen, you
must press the shutter button again to capture smiles in your image.
• After you setted this feature, press the shutter button halfway down to start
the smile detection feature.The camera auto detects faces that are close to
the center of the screen and displays the AF frames (up to 5 frames).The
camera searches for smiles on your subjects' faces.When all detected faces
smile, the camera will take the pictures without you having to fully press the
shutter button.
Polaroid i1035 Digital Camera User Guide
Downloaded from ManualsCamera.com Manuals
www.polaroid.com
button to set the camera
button and press the
or to select
button to enter.
or button to select the
button to confirm your
Quick Review
Focus Area
Smile Detection
Blink
Face Tracking
Smile
STILL
2 Seconds
Single AF
Off
Off
Off
2/2
Smile Detection
Off
On
47