Table of Contents
Advertisement
Appendix A. CRU instructions
4 Remove the hard disk drive by gently pulling it in the direction of the
arrow
d
5 Remove the screws and detach the metal frame from the hard disk drive.
6 Attach the metal frame to a new hard disk drive and tighten the screws.
7 Slide the new hard disk drive firmly into place, and then reinstall the
frame fixing screws to secure the drive.
8 Reinstall the bottom slot cover and tighten the screws.
9 Reinstall the battery pack. For details, see "Replacing the battery pack" on
page 31.
.
4
34
Hide quick links:
Advertisement
Table of Contents
Troubleshooting
