Switching Fonts - Oki B 6200 User Manual

Switching Fonts

Set a Primary and Secondary Font
For PCL5, you can set one Primary and one Secondary font, then use the SI
and SO commands to switch between them.
Commands used:
Command
Assign FontID
Assign FontID to FontFile in storage
Set primary font by FontID
Set secondary font by FontID
Switch to primary font
Switch to secondary font
Example
To set the default resident font Courier as the Primary font and the
downloaded font Download1.bin as the Secondary font, then switch
between them:
<ESC>%-12345X@PJL ENTERLANGUAGE=PCL<0D><0A>
<ESC>*c1000D<ESC>&n12W<01>Download1.bin
<ESC>)1000X
<0F>[D
ATA
<0E>[D
ATA
<0F>[D
ATA
<0E>[D
ATA
<0C>
<ESC>%-12345X
S ].<0D><0A>
TRING
S ].<0D><0A>
TRING
S ].<0D><0A>
TRING
S ].<0D><0A>
TRING
ASCII
<ESC> * c # D
<ESC> & n # W [01]
<ESC> ( # X
<ESC> ) # X
SI
SO
/ * assign Font ID 1000 to Download1.bin */
/* Set Downloaded font as Secondary font */
27
Printing Using Fonts and Forms
Hexadecimal
1B 2A 63 # 44
1B 26 6E # 57 [01]
1B 28 # 58
1B 29 # 58
0F
0E
/ * Select Primary font */
/ * Select Secondary font */
/ * Select Primary font */
/ * Select Secondary font */