Panasonic TC-50PX14 Service Manual page 112

TC-50PX14
TC-P50C1
TC-P50X1
TC-P50X1X
TC-P50X1L
TH-50PD12U
Please revise the original parts list in the Service Manual to conform to the change(s) shown herein.
If new part numbers are shown, be sure to use them when ordering parts.
Please file and use this manual together with the service manual.
Subject : Supplier change for SU/SD baord
Reason for Change
*The circled item indicates the reason. If no marking, see the Notes in the bottom column.
1. Improve performance
2. Change of material or dimension
3. To meet approved specification
4. Standardization
5. Addition
6. Deletion
7. Correction
8. Other
Interchangeability Code
**The circled item indicates the interchangeability. If no marking, see the Notes in the bottom column.
Parts Set Production
A Original Early
New Late
B Original Early
New Late
C Original Early
New Late
D Original Early
New Late
E Other
Part Number
Model No. Ref. No.
see above PCB
PCB
Supplier was changed from PAVCA to AVC-CSPC
Original or new parts may be used in early or late production set.
Use original parts until exhausted, then stock new parts.
Original parts may be used in early production sets only. New parts may be used in early or late
production sets. Use original parts where possible, then stock new parts.
New parts only may be used in early or late production sets.
Stock new parts.
Original parts may be used in early production sets only. New parts may be used in late production
sets only. Stock both original and new parts.
Original Part No. New Part No.
TXNSU1EPUU TNPA4780
TXNSD1EPUU TNPA4781
ORDER NO.ITD0911166PE
Qty Part Name & Descriptions
1 CIRCUIT BOARD SU
Supplier was changed from PAVCA to AVC-CSPC
1 CIRCUIT BOARD SD
Supplier was changed from PAVCA to AVC-CSPC
© Panasonic Corporation
copying and distribution is a violation of law.
B34 Canada: B07
2009. Unauthorized