Table of Contents
Advertisement
TCP/IP Tab
This allows you to configure TCP/IP related items.
Location
Use TCP/IP Protocol
Use DHCP/BOOTP
Use RARP
IP Address
Subnet Mask
Default Gateway
Use FTP/LPD Banner
DNS Server . . .
To find corresponding items in WEB and TELNET, see the equivalent in
the Configurable Items and Default Values table that starts on
page 59.
Comments
Set TCP/IP protocol as enabled/disabled.
Check this item if IP address, subnet mask, default gateway and
IP addresses for DNS primary server and secondary servers are
retrieved from the DHCP or BOOTP server. Otherwise, uncheck.
Check this item if IP address is retrieved from the RARP server.
Otherwise, uncheck.
Set the IP address of the selected network interface card.
Set the subnet mask of the selected network interface card.
Set the default gateway of the selected network interface card.
Check this item if you want to add the FTP/LPD banner. Otherwise,
uncheck.
Set IP addresses for DNS primary and secondary servers.
Configuration 23
Advertisement
Table of Contents
