Navigating With Gps; Getting Gps Signal - Suunto TRAVERSE 1.0 User Manual

4. Press [NEXT] to activate Sync now.
If your mobile device has an active data connection and your app is
connected to your Movescount account, settings and logs are
synced with your account. If there is no data connection, syncing is
delayed until a connection is available.
Unsynced logs recorded with your Suunto Traverse are listed in the
app, but you cannot view the log details until they are synced with
your Movescount account. Activities that you record with the app
are immediately viewable.
NOTE: Carrier data connection fees may apply when syncing
between Suunto Movescount App and Movescount.

3.16 Navigating with GPS

Suunto Traverse uses the Global Positioning System (GPS) to
determine your current position. GPS incorporates a set of satellites
that orbit the Earth at an altitude of 20,000 km at the speed of 4
km/s.
The built-in GPS receiver in Suunto Traverse is optimized for wrist
use and receives data from a very wide angle.

3.16.1 Getting GPS signal

Suunto Traverse activates GPS automatically when you select a sport
mode with the GPS functionality, determine your location, or start
navigating.
41