Oki OkiLAN 8100e User Manual page 92

Verify the printer status using the lpstat command.
# lpstat –pC5300_lp
> The result of lpstat may not be displayed correctly depending on
UNIX operating system specification (e.g. Solaris 2.x).
FTP printing
FTP (File Transfer Protocol) is used for transferring a file with TCP/IP. If
the print data is sent to a logical printer via FTP, it is printed.
Refer to the workstation's manual for details of the ftp command. The
following explanation uses print file test.prn with printer name
C5300_lp as an example.
Logical directories
OkiLAN 8100e includes three logical directories.
lp must be used for printing a file created using the printer driver.
sjis must be used for printing a text file of Shift JIS Kanji code.
euc must be used for the printing a text file of the EUC Kanji code
Logical directory Printer function
lp
sjis
euc
> jis and euc function only as PostScript printers.
> You can not send data to the root directory.
1. Login to the network interface card.
When printing with ftp, use any values for name and password.
However, if the user name is [root], the password set under TELNET or
the utility is required. See the appropriate section for details.
Example: Logging in with host name C5300 (or
192.168.20.127).
# ftp C5300 (or ftp 192.168.20.127
Connected to C5300
For direct output
For Shift JIS Kanji converted output
For EUC Kanji converted output
UNIX 92
IP address