Connecting A Bluetooth Headset; Unpairing From A Bluetooth Device - HTC Desire 530 User Manual

144 Wireless sharing

Connecting a Bluetooth headset

You can listen to music over a Bluetooth A2DP stereo headset, or have hands-free conversations
using a compatible Bluetooth headset.
Before you connect your headset, make it discoverable so HTC Desire 530 can find it. Refer to
your headset manual for details.
1. Turn Bluetooth on and check the list of available devices.
See Turning Bluetooth on or off
2. If you don't see your headset listed, tap Scan for devices to refresh the list.
3. Tap the name of your headset in the Available Devices section. HTC Desire 530 pairs with the
headset and the headset connection status is displayed in the Paired Devices section.
4. If prompted to enter a passcode, try 0000 or 1234, or consult the headset documentation to
find the passcode.
When the Bluetooth headset is connected, you'll see
Reconnecting a Bluetooth headset
Normally, you can easily reconnect your headset by switching on Bluetooth on HTC Desire 530, and
then turning on the headset.
However, you might have to connect manually if your headset has been used with another Bluetooth
device.
1. Turn Bluetooth on and check the list of paired devices.
See Turning Bluetooth on or off
2. Tap the headset's name in the Paired Devices section.
3. If prompted to enter a passcode, try 0000 or 1234, or consult the headset documentation to
find the passcode.
If you still cannot reconnect to the headset, follow the instructions in
device on page 144, and then follow the steps under

Unpairing from a Bluetooth device

1. Turn Bluetooth on and check the list of paired devices.
See Turning Bluetooth on or off
2. In the Paired devices section, tap
3. Tap Unpair.
on page 143.
in the status bar.
on page 143.
Connecting a Bluetooth headset
on page 143.
next to the device to unpair.
Unpairing from a Bluetooth
on page 144.