Eco Light Sensor - Samsung SyncMaster S23A950D User Manual

7
Setup and Reset
Configuring Backlight
1
Press [
2
Press [
3
Press [
4
Press [
5
Press [
6
The selected option will be applied.

7.1.2 Eco Light Sensor

The Eco Saving feature optimizes the view condition and contributes to power saving by adjusting the
screen brightness depending on the ambient light intensity.
Configuring the Eco Light Sensor
1
Press [
2
Press [
3
Press [
Downloaded from ManualMonitor.com Manuals
m
] on the product.
] to move to SETUP&RESET
] to move to ECO and press [
] to move to Backlight
ECO
Off : Turn off the screen and activate DPMS mode. If
for the monitor to detect movement and turn on after it turned off.
Dimming: Reduce the brightness of the screen (still turned on).
] to move to the option you want and press the [
The optimal working area for
angle (40°).
If there is no user movement, the
If you think that the mode entry message appears too frequently, increase the time setting of the
Eco Motion Sensor or turn the
Avoid using radio equipment such as a walkie-talkie near the product as this may cause a product
malfuction.
This menu is not available when
This menu is not available when
m
] on the product.
] to move to SETUP&RESET
] to move to ECO and press [
and press [ ] on the product.
] on the product.
and press [ ] on the product. The following screen will appear.
Eco Motion Sensor
5 Min
Backlight
Off
Dimming
Eco Light Sensor
Sensitivity
Brightness Level
Eco Saving
Off
Eco Icon Display
Off
Return Move
Off
Eco Motion Sensor is within a certain distance (1m) and atcertain
Eco Motion Sensor
Eco Icon Display Off.
Bright is in Dynamic Contrast
Eco Saving is enabled.
and press [ ] on the product.
] on the product.
Enter
is selected, it takes several seconds
].
may fail to detect motion.
mode.
7 Setup and Reset
56