Akai MPC Touch Quick Start Manual page 7

Display
Here is some general information about how to use the MPC Touch display:
Tap a button or option to select it.
Use the Data Dial or –/+ buttons to
change its setting or value.
Double-tap a button to access
advanced editing options. In
some cases, this will show a
numeric keypad that you can use
to enter a value (an alternative to
the Data Dial or –/+ buttons). Tap
the upper-left part of the display
to return to the previous view.
x2
Spread two fingers to zoom in (into
a section of a waveform, for
example). Pinch two fingers to
zoom out.
7