Table of Contents
Advertisement
G E T T I N G S T A R T E D
POWER FOLDING OUTSIDE MIRRORS FOR STANDARD AND TRAILER TOW
If equipped with power folding mirrors, they can be electrically folded rearward and
unfolded into the drive position.
The switch for the power folding mirrors is located between the power mirror switches
L (left) and R (right). Push the switch once and the mirrors will fold in, push the
switch a second time and the mirrors will return to the normal driving position.
If the mirror is manually folded after electrically cycled, a potential extra button push
is required to get the mirrors back to the home position. If the mirror does not
electrically fold check for ice or dirt build up at the pivot area which can cause
excessive drag.
Resetting the Power Folding Outside Mir-
rors
You may need to reset the power folding
mirrors if the following occurs:
• The mirrors are accidentally blocked
while folding.
• The mirrors are accidentally manually
folded/unfolded.
• The mirrors come out of the unfolded
position.
• The mirrors shake and vibrate at nor-
mal driving speeds.
To reset the power folding mirrors: Fold
and unfold them by pushing the button
(this may require multiple button pushes). This resets them to their normal position.
NOTE:
• The power fold mirrors are designed to operate while the vehicle is stationary or
traveling at moderate speeds. If you attempt to power fold the mirrors at high
speeds they may not fully open or close. You should slow down to a moderate speed
and complete the operation.
• When pushing the power fold button 10 or more times in one minute the system
shuts down for one minute to protect the motors from over heating.
36
Power Folding Mirror Switch
Advertisement
Table of Contents
