Machine Settings - Oce OP1030 Operation Manual

2-5 Various Settings in the TX Setting Dialogue Box

(6) Machine Settings

1. If you want to temporarily change the Network FAX address (IP address or host name registered in the scanner default
settings of the machine itself) from that which is currently made in the "(3) Machine Setting Tab" under "2-4 Default
Setting Dialogue Box" on page 2-10, click on the Machine Setting tab in order to access the Machine Setting tab.
NOTE: The changes made here will only apply to the present transmission and the corresponding settings will return to
those previously made in the Default Setting dialogue box once that transmission is completed.
2. Use the keyboard to enter the Network FAX IP address (IP address registered in the scanner default settings) or the
Network FAX host name (host name registered in the scanner default settings).
3. To start the fax transmission, click on the Send button.
To continue the settings for other tabs, click on another tab.
Page 2-20