General Settings; Audio Options; Backlight Options; Software Version & Upgrade - PURE CHRONOS CD Owner's Manual

General settings

Audio options

To adjust the bass and treble output of your Chronos CD, press Menu, then scroll and select
'Audio'. Select either 'Bass' or 'Treble' and use the Navigation dial to adjust from -3 to +3
and push to confirm.

Backlight options

To adjust screen backlight of your Chronos CD, press Menu, then scroll and select 'Backlight'.
The backlight menu has two options:
Timeout Set the length of time that the backlight remains on after a button
press, from always on (On) up to 180 seconds.
Level Set the brightness level of the backlight, from 1-5 or Auto (default). In Auto
mode the backlight will be adjusted by the light sensor on your radio.
Software version & upgrade
To check the software version of your Chronos CD, press Menu then scroll to and select
'SW version'. This will display the current version on screen. Press any button to exit.
Software upgrades may be issued to provide enhanced functions or improve performance. To
upgrade, press Menu, then scroll and select 'Software Upgrade' and follow the instructions
provided with the upgrade software. Register your product and include an e-mail address to
receive notification of upgrades or visit our website at http://support.pure.com.
Note: USB upgrade requires a PC running Windows XP/Vista and a suitable USB cable (not
included).
EN
11