Table of Contents
Advertisement
Symptom
No tape can be inserted.
The remote commander does
not function.
You cannot control other TVs.
The tracking indicator does not
appear on the screen.
The VCR needs to be cleaned.
Remedy
• Check that a tape isn't already in the tape
compartment.
• Make sure you are pointing the remote commander
at the remote sensor on the VCR.
• Replace all the batteries in the remote commander
with new ones if they are weak.
• Make sure the TV / VIDEO remote control switch
is set correctly.
• Set your TV's code number. The code number
resets to 01 when you replace the batteries of the
remote commander.
• The recording condition of the tape is very poor
and tracking cannot be adjusted, or the NTSC
system is being used.
• Clean the cabinet, panel and controls with a dry,
soft cloth, or a soft cloth slightly moistened with a
mild detergent solution. Do not use any type of
solvent, such as alcohol or benzine.
SLV-X837AS 3-858-900-11 (1)
55
Additional Information
Advertisement
Table of Contents
