Zone Eq Control And Source Grouping; Volume Reset; All Off - Nuvo Simplese NV-A4DS-UK Installation Manual

EQ Control and Source Grouping
The keypads can be used to set specific zone functions.
These are for bass and treble EQ response and source
grouping. To change bass response, press the Mute
button and Source 1 button simultaneously. Adjust the
bass level up or down by using the Volume Up and
Volume Down buttons. The volume indicator LEDs will
indicate the output level, fig. 7. Adjust treble response
using the same process. This is accessed by pressing the
Mute and Source 2 buttons. Once the desired setting is
made, press the Source button again to return the
keypad to normal operation.
Source grouping is a feature that allows multiple zones
in an open living space to always share the same source
selection but still retain individual volume and on/off
control. This is achieved by pressing Mute and Source 3.
Volume Up enables the group function, and Volume
Down disables the group function and causes the
keypad to operate independently of all other groups,
fig. 8.

Volume Reset

The Simplese System keypads automatically reset the
listening volume to a low level when all zones have been
turned off and a zone is turned on again. If a zone is
turned off and turned back on before all the zones are
turned off, it will return at the previous volume level.

All Off

All the zones in the system can be turned off
simultaneously from any keypad by pushing and
holding the power button until the keypad goes
completely dark. A single push and release of the power
button will only turn that zone off. If another zone is on,
the power button will remain lit.
The lit volume LED
indicates the treble
and bass levels.
Press the Mute and
Source 1 for bass
control and Mute and
Source 2 for treble
control.
Fig. 7
-6 dB
-8 dB
Fig. 8
Group Disabled
11
VOLUME
MUTE
MP3 CD
SAT
HD
FLAT
-4 dB +4 dB
+6 dB
+8 dB
VOLUME
Group Enabled
VOLUME