Driver Installation Guide - ASROCK E35LM1 Installation Manuals

2.8

Driver Installation Guide

To install the drivers to your system, please insert the support CD to your optical
drive fi rst. Then, the drivers compatible to your system can be auto-detected and
listed on the support CD driver page. Please follow the order from up to bottom side
to install those required drivers. Therefore, the drivers you install can work properly.
2.9 Installing Windows
/ XP 64-bit Without RAID Functions
If you want to install Windows
bit OS on your SATA / SATAII / SATA3 HDDs without RAID functions, please follow
below procedures according to the OS you install.
2.9.1 Installing Windows
Functions
If you want to install Windows
HDDs without RAID functions, please follow below steps.
AHCI mode is not supported under Windows
Using SATA / SATAII / SATA3 HDDs without NCQ function
STEP 1: Set up UEFI.
A. Enter UEFI SETUP UTILITY
B. Set the option "SATA Mode" to [IDE].
STEP 2: Install Windows
2.9.2 Installing Windows
Without RAID Functions
If you want to install Windows
/ SATAII / SATA3 HDDs without RAID functions, please follow below steps.
Using SATA / SATAII / SATA3 HDDs with NCQ function
STEP 1: Set up UEFI.
A. Enter UEFI SETUP UTILITY
B. Set the option "SATA Mode" to [AHCI].
STEP 2: Install Windows
system.
20
®
7 / 7 64-bit / Vista
® TM
7 / 7 64-bit / Vista
®
XP / XP 64-bit Without RAID
®
XP / XP 64-bit OS on your SATA / SATAII / SATA3
Advanced screen
®
XP / XP 64-bit OS on your system.
®
7 / 7 64-bit / Vista
® TM
7 / 7 64-bit / Vista / Vista
Advanced screen
® TM
7 / 7 64-bit / Vista / Vista
ASRock E35LM1 Motherboard
TM TM
/ Vista 64-bit / XP
TM
/ Vista 64-bit / XP / XP 64-
®
XP / XP 64-bit OS.
Storage Confi guration.
TM TM
/ Vista 64-bit
TM
64-bit OS on your SATA
Storage Confi guration.
TM
64-bit OS on your