Aux Mode - Mercedes-Benz COMAND Operating Instructions Manual

AUX mode

202
DVD video mode functions
To hide a menu: confirm
X
button.
The video image is played in full screen mode.
Additional setting options:
Adjust the brightness, contrast and color
X
( page 192).
Y
Change the picture format (
X
Adjust the sound settings (
X
AUX mode
Introduction
You can connect external video sources with a
sound and video signal to the Rear Seat Enter-
tainment System:
one external video source to each of the rear
R
screens (AUX display)
one external video source to the rear-com-
R
partment disc drive (AUX drive)
Operating the external video source; see the
manufacturer's operating instructions.
For further details about external video sources,
please consult an authorized Mercedes-Benz
Center.
Connecting AUX equipment
AUX drive jacks
The AUX drive jacks are located on the rear-
compartment drive to the right of the þ
( page 188) button.
Y
AUX display jacks
The AUX display jacks are on the side of the two
rear screens (
Y
Connecting audio and video cables
Insert the audio plugs for the left and right
X
signals into the corresponding L and R jacks.
Insert the video plug into the V jack.
X
Menu with the 9
page 192).
Y
page 192).
Y
page 187).
Activating AUX mode
AUX drive
Requirements: the external video source is con-
nected to the rear-compartment drive and play-
back is selected.
Select Aux in the menu using the
X
9=; buttons on the remote con-
trol and press the 9 button to confirm.
The AUX menu appears.
Select Source from the AUX menu and press
X
the 9 button to confirm.
Select Disc Drive Aux
X
button to confirm.
Playback starts. If an external video source
does not provide a video picture, an audio
menu appears.
Displaying AUX
Requirements: the external video source is con-
nected to the rear-compartment screen and
playback is selected.
Select a screen using the thumbwheel on the
X
remote control ( page 187) until "L REAR"
Y
(left-hand screen) or "R REAR" (right-hand
screen) is highlighted in the window.
Select Aux in the menu using the
X
9=; buttons on the remote con-
trol and press the 9 button to confirm.
Select Source from the AUX menu and press
X
the 9 button to confirm.
Select Display Aux
X
to confirm.
Playback starts. If an external video source
does not provide a video picture, an audio
menu appears.
Adjusting treble and bass
Select Treble or Bass
X
press the 9 button on the remote control to
confirm.
A scale appears.
Select a setting using the 9 or : but-
X
ton and press the 9 button to confirm.
and press the 9
and press the 9 button
in the AUX menu and