Connection - Panasonic WV-TW310L Installation Manual

Connection

Caution:
• ONLY CONNECT 12 V DC CLASS 2 POWER SUPPLY or LIMITED POWER SOURCE.
Before starting the connection, turn off the power for this camera and the devices to be connected,
and then prepare the required devices and cables.
Connection example when connecting to a network using a
PoE hub
<Required cable>
LAN cable (category 5 or better, straight, STP*)
* E models only
IMPORTANT:
• Use a switching hub or a router which is compliant with 10BASE-T/100BASE-TX.
• Power supply is required for each camera. When using a PoE device (hub), 12 V DC power
supply is unnecessary.
Charge 5 V DC
Data Communication
PoE Hub
LAN cable (category 5 or
better, straight, STP*) PC
LAN
PC
23