Pitch Shift - Standard Vso; Pitch Shift - Multi Mono Vso; Pitch Shift - Post Vso; Signal Generator - Lexicon PCM96 SURROUND Owner's Manual

Hide thumbs Also See for PCM96 SURROUND:

Table of Contents

work very differently, based on machine type.

PITCH SHIFT - STANDARD VSO

This simple pitch shifter provides high-quality shifting by semitones and

cents. In stereo or surround, this is the best choice for full music mixes or

for any multichannel submixes. Shifting on all channels is linked, so that the

resultant soundstage remains stable.

This shifter shifts all channels independently, making no effort to maintain

multichannel coherence. It is intended for multichannel material in which

the channels do not share material. It may be used in 4, 5, and 6-channel

machines.

This shifter shifts stereo groups independently, keeping channels within the

groups coherent, but making no effort to maintain coherence between stereo

groups. It is of most value in audio post, where L/R, LS/RS are perceived as

stereo pairs. Center and LFE are uncorrelated.

In this algorithm, center and LFE channels (if present) are treated inde-

pendently. The lowest frequency parameter does not affect shifting in these

channels.

This algorithm is used to generate test signals. These signals may be used

both for building presets and for testing aspects of recording studio function-

ality. The sweep tone generator is good both for locating bad speaker drivers

and for scaring your cat.

Table of Contents