13) Open the clip with the SRT-6 to release the
ENGINE BOARD.
15) The ENGINE BOARD and the D-COVER can now
be separated.
17) Lift up the DC JACK with a DC plug. Remove it
with tweezers.
14
Nokia I nternal Use Only | Copyright © 2012 Nokia | A ll rights reserved
14) Open also the clip on the other side of the
device with the SRT-6 to release the ENGINE
BOARD.
16) Use an AV plug to lift up the AV JACK. Remove
the AV JACK with tweezers.
18) Release the MFD BARD with the dental tool
and remove it with tweezers.
Nokia 109, C1-02i
(RM-907)
L1L2 Service Manual
V ersion 1.0