Lenovo ThinkPad T510 Hardware Maintenance Manual page 101

Table 30. Removal steps of thermal module (continued)
When installing: Before you attach the fan assembly to the computer, apply thermal grease, at an amount of 0.2
grams, on the parts marked
cause a thermal problem due to imperfect contact with a component. For the new CPU thermal device/fan, you
need to peel the thin film off from the rubbers marked
For Switchable Graphics models:
For Integrated Graphics models:
Downloaded from LpManual.com Manuals
6
a
as in the following figures. Either too much or too less application of grease can
b
a b
.
b
a
b
.
Chapter 9 Removing and replacing a FRU
95