Enjoying stereo or bilingual programs (continued)
When receiving an A2 (German) program
Receiving area for NICAM and A2 (German) programs
If the sound is distorted or noisy when receiving a monaural
program through the 8 (antenna) terminal
28
Advanced Operations
Broadcasting
On-screen display (Selected sound)
A2 (German) stereo
A2 (German) bilingual
System
Receiving area
NICAM
New Zealand, Hong Kong, Singapore, Malaysia,
Thailand, etc.
A2 (German)
Australia, Malaysia, Thailand, etc.
Notes
• If the signal is very weak, the sound becomes monaural automatically.
• If the stereo sound is noisy when receiving a NICAM program, select
"Mono". The sound becomes monaural, but the noise is reduced.
• Before receiving a NICAM stereo program in China, please check the
NICAM broadcast condition at your area. When receiving a NICAM
stereo program, the receiving conditions might vary depending on area. In
addition, different strength of the NICAM broadcast signal might affect
the receiving quality.
Press A/B repeatedly until "Mono" appears on the screen.
To cancel the monaural sound setting, press A/B again until "Auto"
appears on the screen.
Mono
Notes
• The "Mono" or "Auto" setting is memorized for each program position.
• You cannot receive a stereo broadcast signal when the TV is in the "Mono"
setting. Normally, set the TV to "Auto".
Mono
(Regular sound)
Main
(Main sound)
Auto
Stereo
(Stereo sound)
Sub
(Sub sound)