Table of Contents
Advertisement
User's Manual
LED Error Messages
E
C
RROR
ODE
Standby
Start-up/Cool Down
Overheating
Thermal Break Sensor error
Lamp Error
Burner Fan error
System Fan error
Power and Ballast Fan error
Case Open
DMD error
Color wheel error
In the event of an error, please disconnect the AC power cord and wait for one (1) minute before re-
starting the projector. If the PWR or READY LED is still blinking or the TEMP LED is lit, contact
InFocus Technical Support at www.infocus.com/support.
Image Problems
Problem: No image appears on the screen
1. Verify the settings on your notebook or desktop PC.
2. Turn off all equipment and power up again in the correct order.
3. Many laptops do not automatically turn on their external video port when a projector is
connected. Usually a key combination like FN + F8 or CRT/LCD key turns the external
display on and off. Locate a function key labeled CRT/LCD or function key with a monitor
symbol. Press FN and the labeled function key simultaneously.
Problem: The image is blurred
1. Adjust the Focus on the projector.
2. Press the Auto Image button on the remote control.
3. Ensure the projector-to-screen distance is within the projection range. (Within 7m/23' for
the standard lens; within 20m/66' for the long lens and within 3m/10' for the short lens).
4. Check that the projector lens is clean.
Problem: The image is wider at the top or bottom (trapezoid effect)
1. Position the projector so it is as perpendicular to the screen as possible.
2. Use the Keystone buttons on the remote control or projector to correct the problem.
Problem: The image is reversed
Check the Projection setting on the Image menu of the OSD.
Problem: The image is streaked
1. Adjust the Frequency and Phase settings in the Display >> PC Detail Adjustment menu..
2. To ensure the problem is not caused by a connected PC's video card, connect to another
computer.
Downloaded from ProjectorsManual.com Manuals
PWR LED
M
ESSAGES
Green
—
ON
—
—
5 blinks
6 blinks
6 blinks
6 blinks
—
8 blinks
9 blinks
READY LED
Red
Red
—
ON
—
flashing
—
—
—
7 blinks
—
—
—
1 blinks
—
2 blinks
—
3 blinks
—
7 blinks
—
—
—
—
– 44 –
TEMP LED
Red
—
—
ON
—
—
—
—
—
—
—
—
Hide quick links:
Advertisement
Table of Contents
