Lenovo ideapad 100S-11IBY Hardware Maintenance Manual page 44

Lenovo ideapad 100S-11IBY Hardware Maintenance Manual
40
Figure 6. Removal steps of system board (continued)
Disconnect the keyboard connector in the directions shown by arrows 2 and 3.
Unplug the LCD connector in the direction shown by arrow 4. Disconnect the
two wireless LAN cables (grey) in the direction shown by arrows 5. Remove
the screws 6.
Step Screw (quantity)
M2 × 3 mm, Phillips-head, nylok-coated (5)
6
PCBA
Remove the system board in the direction shown by arrow 7.
When installing: Make sure that the connectors are attached firmly.
Color Torque
Black 2.0 kgf/cm
7