ECS H61H2-M3 User Manual page 54

50
Chipset Configuration
Scroll to this item to view the following screen:
Main Advanced
Memory Timing Configuration
CAS# Latency (tcl)
Row Precharge Time (tRP)
RAS# to CAS# Delay (tRCD)
RAS# Active Time (tRAS)
Intel Graphics Configuration
GT OverColocking
Memory Timing Configuration
This item shows the information of Memory Timing Configuration.
CAS#Latency(tcl) (9)
This item determines the operation of DDR SDRAM memory CAS (colulmn address
strobe). It is recommended that you leave this item at the default value. The 2T
setting requires faster memory that specifically supports this mode.
Row Precharge Time(tRP) (9)
This item specifies Row precharge to Active or Auto-Refresh of the same bank.
RAS# to CAS# Delay(tRD) (9)
This item specifies the RAS# to CAS# delay to Rd/Wr command to the same bank.
RAS# Active Time(tRAS) (24)
This item specifies the RAS# active time.
Intel Graphics Configuration
This item shows the information of Intel Graphics Configuration.
GT OverClocking [Disabled]
This item allows you to control the internal GFX Turbo mode.
Press <Esc> to return to the Performance Tunning page.
Press <Esc> to return to the M.I.B III menu page.
Aptio Setup Utility - Copyright (C) 2012 American Megatrends, Inc.
Chipset M.I.B III
Version 2.15.1229. Copyright (C) 2012, American Megatrends, Inc.
Using BIOS
Boot Security Exit
9
9
9
24
[Disabled]
Cas Latency, Range 3-15.
:Select Screen
:Select Item
Enter : Select
+/- : Change Opt.
F1:General Help
F2:Previous Values
F3:Optimized Defaults
F4:Save & Exit
ESC:Exit