Main Features; Main Parameter - Haier LET19C400F User Manual

02
Introduction
CAUTION
Never tamper with any components inside
the TV, or any other adjustment controls
not mentioned in this manual. All LED-TVs
are high voltage instruments. When you
clean up dust or water drops on the LED
PANEL or CABINET, the power cord should
be pulled out from the receptacle, then
wipe the TV with a dry soft cloth. During
thunder and lighting, unplug the power cord
and antenna cord to prevent damage to
your TV. All repairs to this TV should only
be performed by qualified TV service
personnel.

Main features

Used as Television, display terminal,
PC display
High luminance, wide viewing
Angle
5 Time Shift

Main parameter

Panel
Power supply
Standby Power consumption
Audio Output Power (THD 7%)
Terminals:
Horizontal definition (TV line)
P.05
INSTALLATION
*Locate the TV in the room where light
does not strike the screen directly.
*Total darkness or a reflection on the
picture screen can cause eyestrain. Soft
and indirect lighting is recommended for
comfortable viewing.
*Allow enough space between the TV and
the wall to permit ventilation.
*Avoid excessively warm locations to
prevent possible damage to the cabinet or
premature component failure.
*Do not cover the ventilation openings
when using theTV.
3 HDMI interface and SCART
Interface
4 NICAM
"
18.5 /21.5" /23.6"
DC 12V, 3A (Power adaptor supplied)
<0.5W
2x3W
Analog RGB(PC)x1
High-Definition Multimedia Interface ( HDMI) x 2
Vdeo Input x1 i
Audio Input x2
USB Input x1
YPbPr x1
Mini SCART x 1
COMMON IN INTERFACE(CI)
Composite Video input >=350
YPbPr >=400