Table of Contents
Advertisement
Maintenance
9) Remove the base cover by lifting up from the back and maneover
out.
10) Remove the back panel by manoeuvring it up and out of the firebbox.
as shown below.
11) Remove 1 screw holding the clip securing the right side panel
12) Remove the side panel.
13) Repeat above 2 steps to remove the left side panel.
36
14) Remove the fan access plate by undoing the 10 screws shown.
Base Cover
15) Remove the 3 screws securing the burner bracket as shown
16) Move the pilot assembly out of the way - be careful of the wires
Fan access plate
below.
leading from the pilot assembly.
Pilot assembly wires
U32S-5 FPI Direct Vent Gas Insert
Advertisement
Table of Contents
