Table of Contents
Advertisement
Sprinter 906
Rear Heater - Prep
Details & Technology
Two water lines (supply line/return line) are routed under the floor panel on the left-hand side
of the vehicle, extending aft of the B-pillar. The ends of the two lines are connected by a hose.
Bodywork modifications for installation of a heat exchanger, the aperture in the wood floor for
the warm air ducting and electrical parts are not included.
Benefits & Arguments
Simplifies installation of the aftermarket heat exchanger in the rear passenger
compartment.
The pre-installation package is recommended for body manufacturers who offer their own –
not ex-factory – hot-water heating systems.
Remarks
Rear Heater Prep is not available with left-side sliding door or on Cab Chassis.
©2015 Mercedes-Benz USA, LLC / Daimler Vans USA, LLC
H88
174
Advertisement
Table of Contents
