Installation - Electrolux EOC55200 User Manual

18 electrolux
Problem
The appliance does not heat up
The appliance does not heat up
The appliance does not heat up
The appliance does not heat up
The oven lamp does not oper-
ate
The pyrolysis function does not
operate (the time display shows
"AS")
The time display shows "Pyro"
The time display shows an error
code
Steam and condensation settle
on the food and in the oven
cavity
If you cannot find a solution to the problem
yourself, contact your dealer or the service
centre.
We recommend that you write the data here:
Model (MOD.)
Product number (PNC)
Serial number (S.N.)

INSTALLATION

Warning! Refer to "Safety information"
chapter.
Possible cause
The oven is not switched on
The clock is not set
The necessary settings are not
set
The fuse in the fuse box is re-
leased
The oven lamp is defective
Shelf support rails/oven shelf
runners are not removed
The oven needs pyrolytic clean-
ing
Electronic error
You left the dish in the oven for
too long
The necessary data for the service centre is
on the rating plate. The rating plate is on
the front frame of the appliance cavity.
Remedy
Activate the appliance
Set the clock
Control the settings
Control the fuse. If the fuse is
released more than one time,
refer to a qualified electrician.
Replace the oven lamp
Remove shelf support rails /
oven shelf runners
Start the pyrolytic cleaning
process
Switch the appliance off and on
again through the fuse or the
safety switch in the fuse box. If
the display shows the error
message again, refer to the
Service Force Centre
Do not leave the dishes in the
oven for longer than 15-20 mi-
nutes after the cooking process
ends
.........................................
.........................................
.........................................