Power Switch - Zte WP560 User Manual

① Power Interface (DC 6V)

② Power Switch

③ USB Interface/ Serial Port Interface
Power on the FWP: move the power switch (see the picture above) to "ON", the
FWP will give a "du" alert and enter into idle mode. Power off the FWP: move the
power switch (see the picture above) to "OFF".
Installing the power adapter
The power for the FWP can be fed from the direct current output from the
power adapter which is connected to the indirect current power source.
Please connect the adapter with FWP's power interface before connecting it with
external AC main supply.
Installing UIM card
If your FWP is without UIM card, you have to install UIM-card before use. When
you are installing UIM card, make sure your FWP's power switch is in "OFF" state
and the external power supply is disconnected.
Please install the UIM-card first before installing the battery。
ZTE WP560/960 User Manual
13