Nortel Contivity Secure IP Services Gateway 2700 Installation Manual page 71

4
Attach the antistatic wrist strap that was shipped with the VPN Router 2700
(see "Attaching the antistatic wrist strap" on page
Caution: Risk of equipment damage
Electrostatic discharge can damage VPN Router 2700 components.
5
To replace a DIMM, remove the installed DIMM as follows:
a
Press down the locking lever on either side of the DIMM
page 72).
b Pull the DIMM up to remove it from the slot.
6
Press down the locking lever on either side of the slot where you plan to
install the new DIMM
7
Place the new or replacement DIMM in the slot
Use the alignment keys to properly position the DIMM in the slot.
8
Press the DIMM firmly into the socket.
9
Pull up the locking lever on either side of the DIMM to snap it into position.
Chapter 4 Installing option cards and DIMMs 71
(Figure 26 on page 72).
Nortel VPN Router Installation — VPN Router 2700
64).
(Figure 26 on
(Figure 26 on page 72).