Table of Contents
Advertisement
Installing and configuring the driver in
Windows 95 and Windows 98
Before installing the e-mobility Windows driver:
•
Verify that the e-mobility 802.11b Wireless LAN DSSS PCI
Card is installed.
•
Obtain the e-mobility Windows driver installation CD.
Note:
802.11b Wireless LAN DSSS PCI Card to the latest
firmware. Use the NICUpdate utility to update the
firmware. Refer to the documentation shipped with the
802.11b Wireless LAN utility suite for instructions about
using NICUpdate. To download the latest firmware, go to
the
http://www12.nortelnetworks.com/software
Installing the driver in Windows 95
Note:
Control Panel Applet (NCPA) utility from Nortel
Networks. Use NCPA to view and configure 802.11b
Wireless LAN DSSS PCI Card settings.
To install the driver for the first time in Windows 95:
Install the 802.11b Wireless LAN DSSS PCI Card as
1
described in the installation section.
Power up the system.
2
Nortel Networks recommends updating the
The Windows driver ships with the Network
12
URL.
Advertisement
Table of Contents
