6. DOWNLOAD AND CALIBRATION
6. DOWNLOAD AND CALIBRATION
6.1 Download
Fig. 6-1 and 6-2 illustrate a download set-up.
Download procedure
Access flash loader program in PC.
Select source code you want to download.
Don't check OWCD AND VERIFY in flash loader window.
Push start button in flash loader window.
Condition
1. Disconnect TA to the Datakit and phone have a battery
a. VBAT < 3.2V
Don't download to the phone.
b. 3.2V
VBAT
First : Connect Datakit to the phone.
Second : Push the power on button until finish download.
c. VBAT > 3.4V
First : Connect Datakit to the phone.
Second : Push the power on button during 1~2second.
Figure 6-1. Download Setup 1.
3.4 V
- 104 -