Harbinger L1402FX-USB User Manual
  1. Manuals
  2. Brands
  3. Harbinger Manuals
  4. Music Mixer
  5. L1402FX-USB
  6. User manual

Harbinger L1402FX-USB User Manual

Lvl series
Hide thumbs

Advertisement

Table of Contents

L1402FX-USB
14-C
M
hannel
ixer

Advertisement

Table of Contents
loading

Related Manuals for Harbinger L1402FX-USB

Summary of Contents for Harbinger L1402FX-USB

  • Page 1 L1402FX-USB 14-C hannel ixer...

  • Page 2: Important Safety Instructions

    IMPORTANT SAFETY INSTRUCTIONS Please keep this instruction manual for future reference and for the duration of owning 14. DAMAGE REQUIRING SERVICE – The product should be serviced by qualified the LvL mixer. Please carefully read and understand the instructions inside this owner’s service personnel when: manual before attempting to operate your new mixer.

  • Page 3: Table Of Contents

    Troubleshooting WELCOME Congratulations on your recent purchase of a new Harbinger LvL Series mixer. They are the perfect choice for bands or individual musicians who are looking for great-sounding mixes, live performance durability and audio specs that studio users demand.

  • Page 4: Quick Start

    QUICK START STUDIO QUICK START – PLUG IN A MICROPHONE AND HEAR IT THROUGH YOUR POWERED STUDIO MONITORS Before we go through each feature on the mixer, we'll show a few • Are the level and gain knobs turned up on channel 1? Are the common setups so that you can begin using your mixer right away.
  • Page 5 L1402FX-USB 14-CHANNEL MIXER LIVE SOUND QUICK START – PLUG IN A MICROPHONE AND HEAR IT THROUGH YOUR PA SPEAKERS Here is a typical live sound setup using two microphones, a stereo Slowly turn the GAIN control on channel 1 up to about ½...
  • Page 6 WHAT'S ON THE FRONT PANEL INPUT/OUTPUT JACKS: Mic Input: XLR connector for a microphone-level signal. This Aux Send 1: Output can be connected to a stage monitor or input also sends +48V phantom power to a microphone when effects processor Phantom Power is switched on.
  • Page 7 L1402FX-USB 14-CHANNEL MIXER 12 13 CONTROL SECTION: High EQ: Controls a high shelving EQ, boosting or cutting Control Room/Phones level: Controls the level going to the frequencies from 12kHz and above Control Room outputs and the Phones outputs. Mid EQ: A peaking EQ control, boosting or cutting frequen- Aux Send to Phones: When pressed, the Aux Send is sent to the cies centered around 2.5kHz...

  • Page 8: Input Types

    INPUT TYPES This chapter will review the types of inputs on the L1402FX-USB mixer and explain each of their features. CHANNELS 1-8: MIC/LINE INPUTS MICROPHONE INPUT (MIC) microphone. Set the gain so that the level on each channel is roughly the same, then use the Level controls to set the This XLR connector will accept virtually any professional microphone.
  • Page 9 L1402FX-USB 14-CHANNEL MIXER EQ LOW L1402FX-USB features one pre and one post fader aux bus. The pre- fader aux bus will send signal to the aux send output regardless of FREQUENCY RESPONSE where the level control is set. The aux send can be sent to different parts of the mixer, depending on the application.

  • Page 10: Output Types

    Main Outputs, there is no chance of a feedback loop. OUTPUT TYPES This chapter explains each of the outputs on the Harbinger L1402FX-USB mixer and their level controls. MAIN OUTS PHONES The Main Outs are line outputs.

  • Page 11: Effects Section

    L1402FX-USB 14-CHANNEL MIXER EFFECTS SECTION The Harbinger L1402FX-USB includes a great-sounding digital effects processor. This chapter explains how to use it. PRESET The L1402FX-USB Effects Processor has 16 presets. Each of these is On effects presets with delay, press this button twice to set the a different effect type.

  • Page 12: Usb

    5. Make sure your DAW application is setup to receive audio from the "Samsung UC Audio" (L1402FX-USB mixer) TROUBLESHOOTING In this chapter, we'll discuss common problems and their solutions, as well as who to contact if things go wrong with your mixer.

  • Page 13: Glossary Of Terms

    L1402FX-USB 14-CHANNEL MIXER GLOSSARY OF TERMS BALANCED REVERB A 3-conductor (including shield), low-impedance connection. An audio effect that emulates the echo reflections and decay time Balanced cables are the preferred method for hum-free intercon- of a large space. nection of a sound system for their noise-rejection characteristics.

  • Page 14: Cable Diagrams

    CABLE DIAGRAMS BALANCED CABLE + Positive + Positive – Negative – Negative S Shield S Shield XLR-M XLR-F 1. Shield T Positive R Negative 2. Positive 3. Negative S Shield UNBALANCED CABLE + Positive + Positive S Shield S Shield 1.

  • Page 15: Block Diagram

    L1402FX-USB 14-CHANNEL MIXER BLOCK DIAGRAM L1402FX - USB Owner's Manual...

  • Page 16: Mixer Specifications

    MIXER SPECIFICATIONS Parameter Condition L1402FX-USB Frequency response Mic In to Main Out 10Hz - 22kHz ±1dB (Trim at 0dB): Mic In to Main Out, 0.007% 20Hz to 20kHz – 114dB Preamp Noise (EIN) 20 Hz to 20 kHz, (150Ω source) –...

  • Page 17: Warranty/Fcc Statements

    (2) year warranty period. Some Harbinger provides, to the original purchaser, a two (2) year limited states do not allow limitation on how long an implied warranty lasts, so the warranty on materials and workmanship on all Harbinger mixers from the above limitation may not apply to you.

Table of Contents