Table of Contents
Advertisement
5019_715_02010_GB_IFU_SbS.qxp
Guide to the inside parts
Removing the freezer compartment baskets
1. Slide the basket out as far as it goes.
2. Lift the front of the basket to release it from the retainer.
3. Pull out the basket completely.
Positioning racks in the freezer compartment (depending on the model)
To obtain maximum storage capacity, remove the two bottom drawers and position the racks supplied
inside the appliance.
Using the appliance
FIRST USE
Connect the appliance to the water system and
power supply (refer to the Installation manual).
When connected to the power supply, the display
lights up and all the symbols appear for a few
seconds. Immediately afterwards, two hyphens
flash on the freezer display whereas the appliance
display indicates a temperature of 5°C (factory-set).
The temperature indicators light up and the
acoustic signal remains activated until the optimum
temperatures are reached. To switch off the
acoustic signal press the OK button. The
temperature alarm indicator is automatically
deactivated when the freezer or refrigerator
compartment reach the required temperature.
This takes from 2 to 3 hours.
Note: It is not possible to modify or interact with
the temperature display functions until the
required temperature has been reached.
Menu
Use this button to select the various optional
functions illustrated in the middle of the control
panel. A different option is illuminated each time
the button is pressed.
OK
Use the OK button to confirm any operation or
selection and to switch off the acoustic signal.
Freezer temperature
The factory-set ideal temperature is -18°C. As soon as
the freezer compartment reaches the required
temperature, it is automatically displayed. This takes
from 2 to 3 hours.
To change the temperature, press the freezer
button until reaching the required value. The
selected temperature flashes and then becomes
fixed within 5 seconds.
12-03-2007
9:36
Pagina 14
Refrigerator temperature
The factory-set ideal temperature is +5°C. The
required temperature is automatically displayed.
To change the temperature, press the refrigerator
button until reaching the required value. The
selected temperature flashes and then becomes
fixed within 5 seconds.
Ice On/Off
This function activates/deactivates the automatic
production of ice.
To activate/deactivate it, press the ice on/off button
until the symbol is no longer illuminated.
Ice Mode: for further information refer to the
section "Using the ice dispenser".
Light
The product is equipped with an external light
allowing the ice and water dispenser to be used
even in the dark. The light can be switched on and
off by pressing the button on the control panel or
pressing one of the two dispenser levers.
The automatic ice-maker and control panel light
automatically switch off after dispensing water or
ice. The light automatically goes off when the
control panel is activated.
14
Advertisement
Table of Contents
