Bosch GLI 10,8 V-LI Professional Original Instructions Manual page 14

OBJ_BUCH-1072-003.book Page 14 Thursday, July 19, 2012 10:31 AM
14 | English
Product Features
The numbering of the product features refers to the illustration of the cordless work-
light on the graphics page.
1 Lamp head
2 On/Off switch
3 Battery pack*
4 Battery unlocking button*
5 Belt clip
*Accessories shown or described are not part of the standard delivery scope of the product.
A complete overview of accessories can be found in our accessories program.
Technical Data
Cordless Worklight
Article number
Rated voltage
Lighting duration, approx.
Operating temperature
Storage temperature
Weight according to EPTA-Procedure 01/2003
Assembly
Battery Charging (Accessory) (see figure A)
Use only the battery chargers listed on the accessories page. Only these bat-
tery chargers are matched to the lithium ion battery of your cordless worklight.
Note: The battery is supplied partially charged. To ensure full capacity of the battery,
completely charge the battery in the battery charger before using your power tool for
the first time.
The Lithium-Ion battery can be charged at any time without reducing its service life.
Interrupting the charging procedure does not damage the battery.
The lithium ion battery is protected against deep discharging by the "Electronic Cell
Protection (ECP)". When the battery is empty, the cordless worklight is switched off
by means of a protective circuit.
Do not continue to press the On/Off switch after the cordless worklight has been
automatically switched off. The battery can be damaged.
1 609 929 W76 | (19.7.12)
GLI 10,8 V-LI
3 601 D37 U..
V= 10.8
min 450
°C – 10 ... +40
°C – 15 ... +50
kg 0.3
Bosch Power Tools