Function Description; Energy Saver Operation; Fan Operation Mode - Samsung W0690 Service Manual

3-2 Function Description

Temperature/
Timer settings
Timer button
Timer indicator
Temperature
adjustment buttons
Remote Control
Sensor
Fan speed
adjustment button
Fan speed indicator
3-2-1 Cooling operation mode
The compressor is turned on and off according to the ambient temperature and set temperature.
1. Compressor on and off control
• Compressor on and off control according to the ambient temperature.
The compressor is turned off when "ambient temperature = set temperature "
*
The compressor is turned on when "ambient temperature = set temperature +1˚C"
*
2. Default value after power reset
3. Set temperature indicating (setting) range : 1˚C interval from 18˚C to 30˚C.

3-2-2 Fan operation mode

1. If "Fan operation mode" signal is received from remocon.
the compressor is immediately turned off and only fan motor is operated at set blowing speed.
it changes such as "HIGH
2. The initial FAN speed is set to "HIGH".
3. The set temperature can not be indicated and set.

3-2-3 Energy Saver Operation

If the compressor turn off at the cooling operation, the fan motor turn off after operating during the fixation time only,
and operation that save energy by turn off the fan motor continuously before the condition of the compressor on.
The fan motor is not operated at flow wind operation.
1. Energy Saver operation specification at the cooling operation
1) Fan motor control in compressor on : operate with setting wind speed
2) Fan motor control in compressor off : After compressor off, the fan motor is operated breeze for 2 minutes and then it
3) After the fan motor off, the compressor and fan motor is operated normally when the compressor on.
3-2
Swing indicator Air Swing button
set temperature = 18˚C, 75˚F
FAN SPEED = HIGH
1˚F interval from 64˚F to 86˚F.
MED LOW"( if Fan speed is selected).
turn off.
On/Off button
Energy saver button
Energy saver indicator
Cool indicator
Fan indicator
Operation mode
selection button
Samsung Electronics