Starting The Connection Assistant, Entering The Pin - Siemens Gigaset S675 IP Installation Manual

Saving VoIP access data
If "Update firmware?" is shown in the display, updated firmware is already available for
your phone. Press the right-hand Display key §Yes§. The new firmware will be loaded. This
takes approx. 3 minutes. The Message key
>
Press the Message key
9

Starting the connection assistant, entering the PIN

Connection Assist.
Start wizard
for entry of VoIP
connection data?
No
>
Press the key below
(= right Display key).
If the connection assistant does not start properly, you can start it via the following handset
p
menu: (press right)
f
to start configuration.
Yes
on the display
§Yes§
¢ Ð ¢
Telephony
f
will now flash again.
Please enter
System PIN:
[- - - -]
Ý
>
Using the Number keys, enter the base
station's system PIN. The default PIN is
"0000".
>
Press the right-hand Display key §OK§.
¢
Connection Assist.
System PIN
OK
13