Copying A Clip - Sony PMW-EX30 Operating Instructions Manual

2
Select "Execute", and press the SET
button.
The OK mark is applied to the selected
clip.
To delete the OK mark
For a clip already marked with OK, the Clip
Operation menu of the thumbnail screen
displays "OK MARK DEL".
1
Select "OK MARK DEL" from the
Clip Operation menu.
The information screen for the selected
clip appears, and a confirmation
message is displayed below the index
frame image.
2
To delete the OK mark, press the SET
button.
The OK mark is deleted from the
selected clip.

Copying a clip

You can copy a clip selected on the
thumbnail screen to another SxS memory
card.
1
On the thumbnail screen of the current
memory card, select the clip you wish
to copy then press SET button.
The Clip Operation menu of the
thumbnail screen pops up.
2
Select "COPY CLIP" from the Clip
Operation menu.
The information screen of the selected
clip appears, and a confirmation
message is displayed below the index
frame image.
3
To copy, select "Execute" then press
the SET button.
60 Clip Operations
Copying begins.
The clip is copied with the same name
to the destination SxS memory card.
An execution message and an in-
progress bar are displayed during
copying.
When copying ends, the thumbnail
screen is restored.
Notes
• If there is another clip having the same
name on the destination SxS memory
card, the clip is copied under a name
adding a single-digit number in
parentheses to the end of the original clip
name.
The parenthetical number is the
minimum value that does not exist in the
destination memory card.
Examples:
ABCD0002(1) if ABCD0002 exists
ABCD0002(2) if ABCD0002(1) exists
ABCD0005(4) if ABCD0005(3) exists
• If parenthetical numbers (1) to (9)
already exist as the result of repeated
copying, copying to that card cannot be
done any more.
• A warning message is displayed if there
is not sufficient space on the destination
SxS memory card. Replace the SxS
memory card with one with sufficient
space.
• When multiple clips are copied from a
source SxS memory card, it may not be
possible to copy all clips to the end.
Depending on memory characteristics
and usage of the memory cards, this can
occur even when the source and
destination memory cards have the same
capacity.
To cancel copying
Press the CANCEL button.
Copying is canceled and the thumbnail
screen is restored.