Removing The Battery Pack And Memory Card; Setting The Date And Time - Canon PowerShot G9X User Manual

Removing the Battery Pack and Memory Card

Remove the battery pack.
Open the cover and press the battery
z
lock in the direction of the arrow.
The battery pack will pop up.
z
Remove the memory card.
Push the memory card in until it clicks,
z
and then slowly release it.
The memory card will pop up.
z

Setting the Date and Time

Set the current date and time correctly as follows if the [Date/Time] screen
is displayed when you turn the camera on. Information you specify this
way is recorded in image properties when you shoot, and it is used when
you manage images by shooting date or print images showing the date.
1
Turn the camera on.
Press the power button.
z
The [Date/Time] screen is displayed.
z
2
Set the date and time.
Touch the item to configure, and then
z
touch [ ][ ] to specify the date and
time.
When finished, press the [
z
3
Specify your home time zone.
Touch [ ][ ] to choose your home time
z
zone.
4
Finish the setup process.
Press the [ ] button when finished.
z
After a confirmation message, the setting
screen is no longer displayed.
To turn off the camera, press the power
z
button.
● Unless you set the date, time, and home time zone, the [Date/
Time] screen will be displayed each time you turn the camera on.
Specify the correct information.
● To set daylight saving time (1 hour ahead), touch [
choose [ ] in step 2.
Before Use
Basic Guide
] button.
Advanced Guide
Camera Basics
Auto Mode /
Hybrid Auto Mode
Other Shooting Modes
P Mode
Tv, Av, M, and C Mode
Playback Mode
Wi-Fi Functions
Setting Menu
Accessories
Appendix
] and
Index
20