Compact Disc Operation - Roadstar HRA-1500MP User Manual

Hide thumbs Also See for HRA-1500MP:
Table of Contents

Advertisement

Available languages
  • EN

Available languages

  • ENGLISH, page 1

COMPACT DISC OPERATION

Loading and Unloading Compact Discs
1. Set the Function Selector (8) to the CD Position.
2. Open the CD Door (3).
3. When the door has opened, remove a disc from its case and place it carefully
in the compartment with the label side facing up. Locate 3" discs, on the cen-
tral spindle in the compartment.
PLAY BACK
1. Load a CD into the disc compartment, and close the compartment.
2. Press the Play/Pause button (18). The Play/Pause indicator will light up and
disc play will begin from the start of the first track of the disc.
3. At the end of the disc, the unit will switch to stop mode and the play indicator
will go out.
4. To stop CD play. Press the Stop Button (19). Disc play will stop, the Play indi-
cator will go off, and the display will show the total number of tracks on the
CD.
5. To temporarily stop disc play (pause mode), press the Pause Button (18).
Disc play will stop at the current play position. The track number indicator will
begin to flash.
6. To resume disc play, press the Play Button again. The Play indicator will light
up.
Notes: If the disc is deeply scratched, or too dirty, disc play may not start.
If an improperly centred disc is played, noise can be heard in the mechanism.
The use of such discs should be avoided.
Starting disc play from the beginning of a particular track
Press the Forward or Reverse Skip Track Buttons (16) to select the desired
track. The number of the selected track will be shown on the CD display (11).
Press the Play/Pause Button (18) to start play.
To skip to the next track
1. To skip to the beginning of next track 5 while track 4 is playing.
2. Press the Skip Forward (17) Skip Track Button once to skip to the beginning
of next track.
3. Continuously pressing the Forward Skip Track Button until the desired trade
is reached.
4. Once the beginning of the last track is reached the CD player will not advan-
ce any further.
To skip back to the previous track on a disc
1. To skip back to the beginning of current track. Press the skip Backward (16)
once.
2. To skip back to the beginning of previous track.
3. Press the skip backward (16) Skip Track Button twice.
English
2

Advertisement

Table of Contents
loading

Table of Contents