Product Setup - D-Link DIR-600 Quick Installation Manual

PRODUCT
SETUP
CD SET-UP WIZARD
English
ADVANCED SET-UP (ACCESS VIA IP ADDRESS)
To configure DIR-600 manually (without the set-up CD) connect your computer to the DIR-600
using the ethernet cable provided. Then connect the power cable on the DIR-600. The power
light will display as solid blue.
Then simply open a browser window and enter the IP address in the browser address field:
IP ADDRESS:
USERNAME:
PASSWORD:
DIR-600
SET-UP WIZARD CD
The CD contains all of the instructions required to set-up DIR-600
INSERT CD
Insert the CD into the CD drive of your computer. The set-up
wizard should start automatically. Make sure that your internet
connection is active. (Do not plug in DIR-600 yet)
SET-UP WIZARD
Select your language from the list of options and follow the
steps within the wizard to complete the set-up of DIR-600
http://dlinkrouter or http://192.168.0.1
admin
5