Hitachi VC325000 Owner's Manual page 50

DVD Mode (Cont.)
NOTE: DVD related functions are effective on: VC325000 VC405000
Video CD playback
When playing a VCD 2.0 with playback control
(PBC), the player will show the VCD version.
• Press the number buttons to select a
corresponding track.
Example:
To play track 9, press 0 and 9, several seconds later, it will automatically
switch to track 9. To play track 15, press 1 and 5, several seconds later, it
will automatically switch to track 15.
• Press the or
Disc handling and maintenance tips
• Hold the disc by the edges so the surface will not be soiled with finger-
prints. Fingerprints, dirt and scratches can cause skipping and distortion.
• Do not write on the label side with a ball-point pen or other writing utensils.
• Do not use record cleaning sprays, benzene, thinner, static electricity
prevention liquids.
• Be careful not to drop or bend the disc.
• Do not insert more than one disc in the disc compartment.
• Do not try to close the disc cover when the disc is not inserted properly.
• Be sure to store the disc in its exclusive case when not in use.
• DO NOT store discs in humid or dusty areas, or where they are exposed to
direct sunlight or sources of heat (such as a heating appliance)
Cleaning dirty discs
• If a disc is dirty, wipe the surface gently with a soft cloth, dampened with a
little water (no other liquids).
• When wiping discs, always move the cloth from the centre hole towards the
outside, which will not cause distortion. (If you wipe the disc using a circular
motion, circular scratches are likely to occur, which will cause distortion.)
• If the disc is brought from a cold to a warm environment, moisture may
form on the disc. Wipe this moisture off with a soft, dry, lint-free cloth
before using the disc.
43
button to play the previous or next track.
After Sales Support
Telephone: 1300 886 649
Email:
info@tempoaustralia.com.au