Expanding The Functionality Of The Telephone; Multiple Handsets - Gigaset A540 Manual

Expanding the functionality of the telephone

Expanding the functionality of the telephone

Multiple handsets

Upgrade the telephone to a cordless PABX.
Information regarding additional handsets can be found at www.gigaset.com.
Compatibility
The main functions of device combinations between base and different handsets are available at:
www.gigaset.com/compatibility
Registering
h
A total of up to four handsets can be registered to the base.
• Handset registration must be initiated on the base and on the handset.
• Both must be carried out within 60 secs.
On the base:
and on the A540 handset:
i
The connection to the base is established; this may take some time.
• The handsets are automatically assigned names "INT 1", "INT 2" etc. Each handset will automatically
be assigned the lowest unassigned number (1-4). Successful registration is shown on the display.
• If four handsets are already registered to the base (all internal numbers assigned), the handset with
the internal number 4 will be replaced with the new one. If this is not possible, because a
conversation is being held on this handset for example, the message No free Internal Number is
given. In this case, another handset that is no longer required should be de-registered and the
registration process should be repeated.
• For other Gigaset handsets and handsets with GAP functionality: register the handset in accord-
ance with the relevant user guide.
De-registering
¤ ¤
q Settings
Menu ¤
. . . select another handset if necessary with q
used is selected
system PIN (default setting: 0000)
Locating a handset ("Paging")
¤
Briefly press the registration/paging key on the base (
("paging"), even if the ringtone is deactivated
Ending the search
On the base:
i
or on the handset:
After approx. 3 minutes, the paging call will end automatically.
18
¤
¢ Hold down (min. 3 seconds) the registration/paging key
page 1) . . .
(
¤
Menu
¤
Handset
0000)
¤ ¤
q Registration
OK
¤ ¤
OK (μ Saved)
¤
Press the registration/paging key again briefly
¤
Press the Talk key c or End call key a
¤ ¤ ¤
q Settings
¤ ¤
OK
. . . enter system PIN if necessary (default setting:
OK
OK
¤ ¤
q De-register Handset
OK ¤
¢
page 1) . . . all handsets ring at the same time
¤
q Registration
OK
¤
OK . . . the handset
¤
. . . if necessary enter the
OK
¤
Register
en ar