Function Buttons; Writing Cd/Dvd On Dvd Super Multi Drives - Toshiba Satellite L500 User Manual

How to remove a CD/DVD when the disc tray will not open
Pressing the eject button will not open the disc tray when the computer is
turned off although, in these circumstances, you can open the tray by
inserting a slender object such as a straightened paper clip about 15mm
into the eject hole just to the right of the drive's eject button.
You must ensure that you turn off the power before you use the eject hole.
If the CD/DVD media is spinning when you open the disc tray, it may fly off
of the spindle and cause injury.

Function buttons

This section describes the Function buttons.
Four buttons are next to the power button on some models.
Icon

Writing CD/DVD on DVD Super Multi drives

The optical drive installed on this computer cannot write multiple sessions
on DVD-R Dual Layer disc sessions. Once a disc has been written to once,
it will be finalized. Once finalized, no further writing to the disc will be
possible regardless of what portion of the total disc capacity was used.
Downloaded from LpManual.com Manuals
User's Manual
1. Eject hole
Figure 4-6 Manual release with the eject hole
Function button
Play/Pause
Previous
Next
Mute
a
Figure 4-7 Function button
DVD
Play/Pause
Previous chapter
Next chapter
Mute
Operating Basics
*CD/None
Play/Pause
Previous track
Next track
Mute
4-6