Dukane 8980WU User Manual page 111

Phenomenon: Cannot control the external device by using Network Bridge.
Item to be checked
Is Network Bridge settings
enabled?
Is STANDBY MODE set to
SAVING?
Are the serial settings set
correctly?
Solutions
Check the settings in OPTION – SERVICE
– COMMUNICATION – COMMUNICATION
TYPE menu.
The Network Bridge is not available when
STANDBY MODE is set to SAVING. Set
STANDBY MODE to NORMAL, and set
NETWORK BRIDGE (WIRELESS/WIRED) in
the COMMUNICATION TYPE menu.
Check the serial settings of the projector and
the external device.
9. Troubleshooting
111