GoPro Hero+ User Manual page 17

/ Settings
INTERVAL
In Video mode, this setting applies only to Looping. Looping lets you
continuously record and save only the best moments, which helps
to conserve space on your microSD card. Available intervals for
looping are 5, 20, 60, and 120 minutes. For example, if you select a
5-minute interval, only the previous 5 minutes are saved when you
stop recording.
You can also select Max as the interval for Looping. With this option,
the camera records until the memory card is full, then overwrites the
oldest content to continue recording. The default option for Looping
is Off.
Note: To use Looping, be sure that your microSD card has sufficient space to create the loop segment
based on the interval that you select. If the microSD card becomes full, Looping does not overwrite
the content.
PRO TIP: Looping video files are written to your memory card in
segments. When viewing this content on a computer, you might
see separate files for each segment. Use GoPro Studio software to
combine the files into a longer video, if needed.
32
PHOTO SETTINGS
For instructions on changing settings, see
(page 17).
INTERVAL
This setting applies only to Time Lapse mode. Interval determines the
amount of time that passes between each captured photo. Available
intervals for Time Lapse range from 0.5 second (default) to 60
seconds.
Interval Examples
0.5-2 seconds Surfing, biking, or other sports
2 seconds Busy street corner
5-10 seconds Sunset
Lengthy activities, such as construction
10-60 seconds
projects
/ Settings
Navigating Settings Menus
33