D-2 Steps To Reboot The System By Using Jumper Jbr1 - Supermicro X10SLA User Manual

X10SLA/X10SLA-F Motherboard User's Manual

D-2 Steps to Reboot the System by Using Jumper JBR1

1. Power down the system.
2. Close pins 2-3 on Jumper JBR1, and power on the system.
3. Follow the BIOS recovery SOP listed in the previous chapter (Appendix C).
4. After completing the steps above, power down the system.
5. Close pins 1-2 on Jumper JBR1, and power on the system.
D-2