[Lvf] Button (Switching The Monitor/Viewfinder); Charging The Battery - Panasonic Lumix DMC-FZ1000 Basic Owner's Manual

Before Use

[LVF] button (Switching the Monitor/Viewfinder)

Press [LVF] to switch between the Monitor and Viewfinder.
•
The monitor/viewfinder will switch as follows:
Automatic viewfinder/
monitor switching
¢ If [Eye Sensor AF] in the [Custom] menu is set to [ON], the camera automatically adjusts the
focus as the eye sensor is activated.
∫ Diopter adjustment
Adjust the diopter to suit your vision so that you can see the
viewfinder clearly.
Look at the display on the viewfinder and rotate the diopter
adjustment dial to where the screen is in focus.
A Diopter adjustment dial

Charging the Battery

1
Attach the battery paying
attention to the direction of
the battery.
2
Connect the charger to the
electrical outlet.
•
The [CHARGE] indicator A
lights up and charging
begins.
∫ About the [CHARGE] indicator
On: Charging.
Off: Charging has completed.
(Disconnect the charger from the electrical socket and detach the
battery after charging is completed.)
•
When the [CHARGE] indicator flashes
–
The battery temperature is too high or too low. It is recommended to charge the battery again
in an ambient temperature of between 10 oC and 30 oC (50 oF and 86 oF).
16
SQT0196 (ENG)
Viewfinder display
¢
¢ Monitor display
90°