Sony Bravia KDL-50W800C Reference Manual

Sony Bravia KDL-50W800C Reference Manual

Hide thumbs Also See for Bravia KDL-50W800C:
Table of Contents

Advertisement

Television
KDL-50W800C / 43W800C
Reference Guide
GB
CT

Advertisement

Chapters

Table of Contents
loading

Summary of Contents for Sony Bravia KDL-50W800C

  • Page 1 Television Reference Guide KDL-50W800C / 43W800C...
  • Page 2: Table Of Contents

    Introduction Table of Contents Thank you for choosing this Sony product. Before operating the TV, please read this manual thoroughly and retain it for future reference. Note • Before operating the TV, please read “Safety Information” (page 2). • Instructions about “Installing the TV to the Wall” are included within this TV’s instructions manual.
  • Page 3 • Places that are hot, humid, or excessively dusty; where insects damage and/or injuries:  Use only Sony supplied AC power cords (mains lead), not those may enter; where it might be exposed to mechanical vibration, near flammable objects (candles, etc.). The TV set shall not be of other brands.
  • Page 4 • Be sure to use the supplied screws and immediately if any of the following problems occur. attachment parts properly following the Ask your dealer or Sony service centre to have it checked by instructions given in this instruction manual. qualified service personnel.
  • Page 5: Precautions

    Wireless Function of the unit fatigue, or nausea) while watching 3D video images or playing stereoscopic 3D games. Sony recommends that all viewers take • Do not operate this unit near medical equipment (pacemaker, regular breaks while watching 3D video images or playing etc.), as malfunction of the medical equipment may result.
  • Page 6: Parts And Controls

    Parts and Controls Controls and Indicators  Remote Control sensor* /   (Input select) Light sensor* / Illumination LED / Display and select the input source. 3D Sync Transmitter* The Illumination LED lights up or blinks * Do not place anything near the sensor. according to the status of the TV.
  • Page 7: Inputs And Outputs

    Inputs and Outputs   VIDEO IN,  HDMI IN 2/3/4 / COMPONENT IN • For a composite connection: • If the device has a DVI jack (socket), Use VIDEO IN, and  (L/R) of / connect it to HDMI IN 3 through a DVI - COMPONENT IN*.
  • Page 8: Using Remote Control

    Using Remote Control Remote Control Parts Description  /  Number buttons (Input select/Text hold) In TV mode: Display and select the input (Twin picture/PIP)* source. Display two pictures simultaneously. In Text mode: Hold the current page.  (Text)  (TV standby) Display text information.
  • Page 9 Internet. If you do not have a GUIDE/ network connection, you will be able to download the software from the Sony support website using Display the digital programme guide. your PC. For details on how to upgrade, please visit the Sony support website.
  • Page 10: Connecting The Tv

    To connect with AV composite cables Connecting the TV Note • When connecting the cable to the Cable/Antenna, input finger tighten only, over-tightening the connection can damage the TV. To connect with an HDMI cable < 21 mm < 12 mm To VIDEO OUT To HDMI OUT To connect with component cables...
  • Page 11 Picture Quality • AV composite cable • Component cable • HDMI cable • Antenna (aerial) cable Standard definition (SD) videos have picture signals with a High definition (HD) videos have picture signals vertical resolution of 480 (NTSC) or 576 (PAL/SECAM) lines. with a vertical resolution of 720 or 1,080 lines.
  • Page 12: Installing The Tv To The Wall

    To Sony Dealers and Contractors Sufficient expertise is required for installing this product. Be sure to read this instruction manual thoroughly to do the installation work safely. Sony is not liable for any damages or injury caused by mishandling or improper installation.
  • Page 13 Installing the Brackets on the wall Prepare necessary items.  Wall-Mount Bracket accessories Paper Template Wall-Mount Base (1) Stand Protector (2) Screw (+PSW M8 × 12) Spacers (2) Stand Screws for Wall-Mount Base (8 mm in diameter, not supplied) Make sure that the wall has enough space for the TV and is capable of supporting a weight of at least four times that of the TV.
  • Page 14 Unit: mm Display dimensions Screen centre dimension Length for mounting Model Name KDL- 50W800C 1,116 43W800C Note • Figures in the table may differ slightly depending on the installation. Make a mark on the Paper Template A that indicates the centre of the screen for your TV. Scale on Paper Template A Mark for KDL-50W800C...
  • Page 15 Preparing for the installation of the TV Insert the pin (on the Stand Protector C) into the hole on the Stand B, then fold up the Stand Protector C. Confirm the Stand Protector C is firmly latched to the Stand B. Attach the Stand B to the TV using the supplied screws D.
  • Page 16 Installing the TV on the wall Make sure to connect and bundle the cables before installing the TV on the wall. Install the TV on the wall. Then, confirm the Stand Protector C is firmly latched into the Wall-Mount Base B and the Spacers E touch the wall. Wall Wall Dimensions of the hole positions on the wall...
  • Page 17: Using An Optional Wall-Mount Bracket

    Sufficient expertise is required for installing this product, especially to determine the strength of the wall for withstanding the TV’s weight. Be sure to entrust the attachment of this product to the wall to Sony dealers or licensed contractors and pay adequate attention to safety during the installation. Sony is not liable for any damage or injury caused by mishandling or improper installation.
  • Page 18 SU-WL450 Attach Wall-Mount Attachment  (supplied with the TV) to the rear of the TV (to make it parallel with the wall). 1.5 N∙m {15 kgf∙cm}  Soft cloth Note • If using an electric screwdriver, set the torque at approximately 1.5 N·m {15 kgf·cm}. •...
  • Page 19 Unit: mm Screen Display dimensions centre Length for mounting dimension Model Name KDL- Standard Slim mounting mounting 50W800C 1,116 43W800C Note • Figures in the table may differ slightly depending on the installation. • When your TV is installed on the wall, the upper side of the TV slightly leans forward. Attach the Attachment parts for Wall-Mount Bracket.
  • Page 20  Screw (+PSW 6 x 20)  Screw (+PSW 6 x 20)  Pulley  Spacer (20mm)  Belt Soft cloth Connect necessary cables to the TV. Note • You cannot access to any terminal after installing the TV to the wall. Install the TV to the Base.
  • Page 21: Troubleshooting

    TV. If the problem persists, contact your dealer or Rear of TV Sony service centre with the number of times the illumination LED flashes red (interval time is three seconds). Disconnect the AC power cord (mains lead), and inform your dealer or Sony service centre.
  • Page 22: Specifications

    Cannot connect to a wireless router by WPS (Wi-Fi Protected Setup). Specifications  If you use WEP security, select [Easy] t [Wi-Fi] t [Connect by scan list]. Then, select the network System name (SSID) you want to connect. Panel system Cannot find the required network name in LCD (Liquid Crystal Display) Panel, LED Backlight network setup.
  • Page 23: Trademark Information

    Active 3D Glasses: TDG-BT500A Dolby and the double-D symbol are trademarks of Dolby Laboratories. • “BRAVIA” and are trademarks of Sony Corporation. • Gracenote, Gracenote eyeQ, Gracenote Operating temperature VideoID, Gracenote Video Explore, the 0 ºC – 40 ºC Gracenote logo and logotype, and the Operating humidity “Powered by Gracenote”...
  • Page 24 Inc. Portions © UEI 2000 – 2014 • The Bluetooth® word mark and logos are owned by the Bluetooth SIG, Inc. and any use of such marks by Sony Corporation is under license. Other trademarks and trade names are those of their respective owners.
  • Page 26: 安全資訊

    規格 ....22 • 應將電視機安裝在易於插拔的 AC 電源插座附近。 • 將電視機擺在平穩的水平表面上,以防止傾倒而造成人員的傷害或 者損及電視機。 • 僅可由合格的維修人員執行掛壁安裝。 • 為了安全起見,強烈建議您使用 Sony 配件,包括:  壁掛式支架 ( 附帶 )  壁掛式支架 SU-WL450 • 將掛鉤 ( 底座 )/ 壁掛式支架安裝於電視機上時,務必要使用隨附於 壁掛式支架的螺絲。隨附螺絲如插圖所示設計從掛鉤 ( 底座 )/ 壁...
  • Page 27 熱器或加熱裝置通風孔的地方。電視機在這種環境下可能會過熱而 導致外殼變形及 / 或電視機故障。 AC 電源線 為了避免火災、觸電或損壞及 / 或受傷等危險,請遵照下列指示來處 情況條件: 理 AC 電源線和插座 :  請僅使用 Sony 隨附的 AC 電源線,不要使用其它品牌的電源線。 • 手濕,機殼拆除或採用非製造商所建議的配件時切勿使用本電視  將插頭完全插入 AC 電源插座。 機。出現雷電時請將電視機電源線從 AC 電源插座和天線拔下。  僅可在 220-240 V AC 電源上使用電視機。 • 不要把電視機安裝在延伸出開放的空間。  連接訊號線時,為了安全起見請務必拔下 AC 電源線,以免被訊號線...
  • Page 28: 預先注意事項

     AC 電源線損壞。  AC 電源插座不適當。  電視機由於跌落、敲擊或撞擊而損壞。 預先注意事項  任何液體或固體物件通過開口處掉入機殼內。 觀賞電視 關於液晶螢幕溫度 • 在觀看 3D 視訊影像或打立體的 3D 電玩期間, 有些人可能會感到不 長時間使用液晶螢幕時,面板周圍溫度會升高。 適 (如眼睛疲勞、疲累或噁心) 。Sony 建議所有觀賞者在觀看 3D 用手觸摸這些地方時可能會覺得很燙。 視訊影像或打立體的 3D 電玩期間要定期休息。休息的長度和頻率 因人而異。由您自行決定。若您感到任何不適,請停止觀看 3D 視 壁掛式支架 訊影像或打立體的 3D 電玩,直到不適感消失;若有必要,請就醫。 關於最新資訊,也請您參閱 (i)用於電視機的其他設備或媒體的 以下資訊說明壁掛式支架的正確使用方式。請務必詳盡地閱讀這些資 使用說明書,以及 (ii)我們的網站...
  • Page 29 本機的無線功能 • 請勿在醫療設備 (心臟起搏器等等)附近操作本機,這將導致該醫 療設備故障。 • 雖然本機發送 / 接收加擾信號,請小心未經授權的截取。我們不對 此造成的任何問題負責。 注意有關處理遠程控制 • 安裝電池時請注意正確的極性位置。 • 請勿同時使用不同類型的電池或混合使用新舊電池。 • 請以符合環境保護規定的方式來丟棄電池。特定地區可能有制訂廢 棄電池的相關規定。請向您當地的主管機關查詢。 • 請小心拿取遙控器。請勿讓遙控器掉落或踩在遙控器上,或是讓任 何液體濺到遙控器。 • 請勿將遙控器放置在接近熱源的地方,放置在受日光直射地方或潮 濕的房間。 壁掛式支架 • 如果您長時間使用壁掛式支架安裝電視機,視牆壁的材料而定,位 於電視機後方或上方的牆面可能變色或壁紙失去黏性。 • 如果拆下原來安裝在牆上的壁掛式支架,牆面上將留下螺絲孔痕 跡。 • 請勿在容易受到振動的地方使用壁掛式支架。...
  • Page 30: 組件及控件

    組件及控件 控件及指示燈  遙控器感應器   ( 輸入選擇 ) / 光感應器 / 照明 LED / 3D 同步發射機 顯示並選擇輸入來源。 照明 LED 會根據電視機的狀態而亮起或閃爍。 • 白色 * 請勿在感應器附近放置任何物品。 開啟電視機 / 關閉畫面模式 / 軟體更新等 時。 • 青色 無線連接行動裝置時。 • 琥珀色 計時器已設定。   ( 電源 ) ...
  • Page 31: 輸入及輸出

    輸入及輸出   VIDEO IN,  HDMI IN 2/3/4 / COMPONENT IN • 如為複合連接︰ • 如果裝置擁有 DVI 插座,請透過 DVI - 使用 VIDEO IN,以及 / COMPONENT HDMI 轉接器接口 (無附帶)將其連接至 IN 的  (L/R) 。 HDMI IN 3,並將裝置的音訊輸出插孔 (插 • 如為組件連接︰ 座)連接至 HDMI 3 AUDIO IN。 及...
  • Page 32: 使用遙控器

    使用遙控器 遙控器組件說明  /  數字按鈕 ( 輸入選擇 / 文字保留 ) 電視模式︰顯示並選擇輸入來源。 *1*2 ( 雙重畫面 /PIP) 文字模式︰保留當前頁面。 同時顯示兩個畫面。  ( 電視待機 )  ( 文字 ) 開啟或關閉電視機 (待機模式) 。 顯示文字資訊。 DIGITAL/ANALOG  顏色按鈕 在數位及類比模式之間切換。 屆時執行相應的功能。 EXIT ( 寬螢幕模式 ) 返回至上一個畫面,或從選單退出。如果交互 變更螢幕格式。...
  • Page 33 開啟或關閉實況足球模式 (此功能可用時) 。 BACK 返回上一個畫面。 遙控器按鈕的位置、可用性與功能視您的國家 / 區域 / 電視機型號而可能略有不同。 HOME 雙重畫面功能自 2015 年 7 月起提供。您將透過軟件 顯示電視主選單。 網絡升級自動接收雙重畫面功能。確保電視機已連接至 互聯網。如果連接網絡,您可以使用 PC 從 Sony 支援 DISCOVER 網站下載軟件。關於如何升級的詳細資料,請瀏覽 Sony 支援網站。 調出內容列,搜尋內容。 //// ( 項目選擇 / 輸入 )   +/– ( 音量 ) 調節音量。...
  • Page 34: 連接電視機

    以 AV 複合訊號線連接 連接電視機 註 • 將連接線連接至連接線 / 天線,僅用手緊固,連接過緊可 能會損壞電視機。 以 HDMI 連接線連接 < 21 毫米 < 12 毫米 至 VIDEO OUT 至 HDMI OUT 以色差纜線連接 至 AUDIO OUT 至 COMPONENT OUT...
  • Page 35 圖像品質 • AV 複合訊號線 • 色差訊號線 • HDMI 訊號線 • 天線的連接訊號線 標準清晰度 (SD)視訊圖像信號的垂直解析度為 480 (NTSC) 高清晰度 (HD)視訊圖像信號的垂直解析度為 720 或 576 (PAL/SECAM)條線。 或 1080 條線。...
  • Page 36: 將電視機安裝在牆上

    將電視機的桌面底座用作壁掛式支架 致客戶 安裝本產品需要足夠的專業技能。務必將安裝的工作委託 Sony 經銷商或授權承包商進行,並在安裝時特別注意 安全。 Sony 對於任何因為錯誤操作或不當安裝,或安裝指定產品以外的任何其他產品所造成的損壞或傷害恕不 負責。您的法定權利 (如有)不會受到影響。 致 Sony 經銷商和承包商 安裝本產品,尤其是在確定牆壁強度是否能夠支撐電視機重量方面,需要足夠的專業知識。將本產品安裝於牆上 的工作務必要委託 Sony 經銷商或經過授權的承包商進行,而且安裝時要特別注意安全。Sony 對於任何因為錯誤 操作或不當安裝所造成的損壞或傷害恕不負責。 您的電視機的桌面底座將被用為壁掛式支架的一部分。 註 • 在進行壁掛式支架的安裝之前,請參閲第 2 頁 ( 安全資訊 ) 和第 4 頁 ( 預先注意事項 ) 關於壁掛式支架的資訊。 • 如果桌面底座安裝於電視機,預先拆下桌面底座。 • 當安裝掛鉤或從電視機拆下桌面底座時,將電視機以螢幕朝下放置在覆蓋著厚而軟布的平坦和穩固的表面上以避免損壞液 晶顯示的表面。...
  • Page 37 將支架安裝在牆上 準備必要的項目。  壁掛式支架配件 紙模板 壁掛式底座 (1) 底座防護器 (2) 螺絲 (+PSW M8 × 12) (2) 墊片 (2) 底座  用於壁掛式底座的螺絲 (直徑 8 毫米,非附件) 確保牆壁有足夠空間以及能支撐至少電視機四倍的重量。 請參閱以下列表有關在牆上安裝電視機。請參閲第 22-24 頁 (規格)有關電視機的重量。 螢幕中心點...
  • Page 38 單元 : 毫米 顯示幕 螢幕中心尺寸 安裝的長度 型號名稱 KDL- 50W800C 1,116 43W800C 註 • 製表內的數字視安裝而可能略有不同。 在紙模板 A 上作標記以表示電視機螢幕的中心。 紙模板 A 上的比例 KDL-50W800C 的標記 KDL-43W800C 的標記 用膠紙將紙模板 A 黏在牆上,然後使用電鑽在紙模板 A 上根據編號鑽孔。 1, 2, 3, 4 牆壁 從牆上取下紙模板 A。 使用螺絲正確地將壁掛式底座 B 安裝在牆上 (直徑 8 毫米,非附件) 。...
  • Page 39 準備安裝電視機 將針(位於底座防護器 C 上)插入底座  上的孔内,然後折起底座防護器 C。確定底座防護器 C 穩固地鎖至底座 。 針 使用附件的螺絲  安裝底座 D 至電視機。將墊片 E 安裝至由三角形記號 f 標記的孔内。 軟布 註 • 若選用此安裝樣式,則無法使用電視機後面的某些端子。 軟布...
  • Page 40 將電視機安裝在牆上 將電視機安裝在牆上之前,確保先連接和捆紮纜線。 將電視機安裝在牆上。 然後, 確定底座防護器 C 穩固地鎖入壁掛式底座 B 以及墊片 E 觸及牆壁。 牆壁 牆壁 在牆上的孔位置的尺寸 如有需要,將以下資訊提供給授權承包商。 使用螺絲 (直徑 8 毫米,非附件)將壁掛式底座 B 安裝在牆上。 務必使用有顯示壁掛式底座 B 實際位置的附件紙模板 A 以便於安裝。 170 毫米 37 毫米...
  • Page 41: 使用選購的壁掛式支架

    使用選購的壁掛式支架 本電視機的使用說明書僅顯示安裝至牆壁之前的電視機安裝準備工作。 致客戶 : 出於產品保護及安全原因,Sony 強烈建議由 Sony 經銷商或授權的承包商安裝電視機。 請勿嘗試自 行安裝電視機。 致 Sony 經銷商和承包商 : 安裝、定期維護及檢查本產品時,請充分注意安全。 安裝本產品須具備充足的專業知識,確定牆壁是否能夠承受電視重量時尤為如此。務必委託 Sony 經銷商或授權 的承包商將本產品安裝至牆壁上,並在安裝期間充分注意安全。對於因錯誤操作或安裝不當引致的任何損害, Sony 概不負責。 使用壁掛式支架 SU-WL450 (無附帶)將電視機安裝至牆壁上。 安裝壁掛式支架時,亦請參閱壁掛式支架附帶的使用說明書及安裝指南。 註 • 務必將取下的螺絲存放在兒童接觸不到的安全位置。 • 在進行壁掛式支架的安裝之前,請參閲第 2 頁 ( 安全資訊 ) 和第 4 頁 ( 預先注意事項 ) 關於壁掛式支架的資訊。...
  • Page 42 SU-WL450 將掛牆式附件  (電視機附帶)安裝至電視機後面 (使之與牆面平行) 。 1.5 N · {15 kgf ·  軟布 註 • 使用電動螺絲刀時,請將扭力設定為約 1.5 N·m {15 kgf·cm}。 • 將此類設備連接至電視機時,務必將掛牆式附件固定到位。 只可用平頭螺絲刀安裝掛墻式附件。用其他工具可能導致掛墻式附件過分扭矩,甚至損壞電視機。 確保牆壁有足夠空間以及能支撐至少電視機四倍的重量。請參閱以下列表有關在牆上安裝電視 機。請參閲第 22-24 頁 (規格)有關電視機的重量。 標準安裝 簡易安裝 螢幕中心點...
  • Page 43 單元 : 毫米 螢幕中心 顯示幕 安裝的長度 尺寸 型號名稱 KDL- 標準安裝 簡易安裝 50W800C 1,116 43W800C 註 • 製表內的數字視安裝而可能略有不同。 • 將電視機安裝至牆壁上後,電視機的上側略微前傾。 安裝壁掛式支架的附件組件。參閱壁掛式支架安裝指南之 「1」 ,檢查附件組件。 註 • 使用電動螺絲刀時,請將扭力設定為約 1.5 N·m {15 kgf·cm}。 • 務必將未使用的組件存放於安全位置,以備日後使用。保管好本說明書,以供日後參考。 標準安裝   螺絲 (+PSW 6 x 20) 螺絲 (+PSW 6 x 50) ...
  • Page 44  螺絲 (+PSW 6 x 20)  螺絲 (+PSW 6 x 20)  滑輪  墊片 (20 毫米 )  皮帶 軟布 將必要的連接線連接至電視機。 註 • 將電視機安裝至牆壁後,無法存取任何端子。 將電視機安裝至底座。請參閱壁掛式支架附帶的安裝指南之 「5」以及使用說明書之 「將電視機 安裝至牆壁」 。 型號名稱 KDL- 掛鉤位置 50W800C/ 43W800C 請參閱您所擁有機型之壁掛式支架附帶的說明書,將電視機安裝至牆壁。...
  • Page 45: 故障排除

    [ 照明 LED] t [ 關 ]。 啟動系統需要時間。等待約 10 至 20 秒,然後重 新操作。 當照明 LED 閃紅燈時,計算閃爍次數 (間隔時間 為三秒) 。 如果照明 LED 閃紅燈,從電視機拔下 AC 電源線, 待兩分鐘之後再打開電視機,以進行電視機重設。 如果問題仍然存在,請聯繫您的經銷商或 Sony 服 務中心並告知照明 LED 閃紅燈的次數 (間隔時間 為三秒) 。拔掉 AC 電源線,然後告訴您的經銷商 無法以 WPS 連接無線路由器 (Wi-Fi Protected 或 Sony 服務中心。 Setup)。 ...
  • Page 46 MHL ( 與 HDMI IN 1 共用 ) 視訊 (2D):1080p (30 Hz), 1080/24p, 規格 1080i (50, 60 Hz), 720p (30, 50, 60 Hz), 720/24p, 576p, 576i, 480p, 480i 系統 視訊 (3D): 並排:1080/24p, 1080i (50, 60 Hz), 面板系統 720p (50, 60 Hz) LCD (液晶顯示)面板...
  • Page 47 License from Universal Electronics Inc. 不含桌面底座 Portions © UEI 2000 - 2014 KDL-50W800C: 1,116 × 654 × 59 毫米 • Bluetooth® 字標和標誌乃 Bluetooth SIG, KDL-43W800C: 962 × 565 × 59 毫米 Inc 所有,Sony Corporation 在授權下使用 這些標記。其他的商標和商品名稱屬於其各 質量 (大約) 自的所有者。 包含桌面底座 2015 RealNetworks, Inc. 專利申請中。版...
  • Page 52 Customer Support and Contact: 用戶支援和聯絡: ©2015 Sony Corporation Printed in Malaysia 4-562-050-11(1)

This manual is also suitable for:

Bravia kdl-43w800c

Table of Contents